Williams AV IR SY1 Small Area Infrared System 1 Kit

Original price was: $865.00.Current price is: $98.00.

In Stock

Description

TheIR SY1 Small Area Infrared System 1 KitfromWilliams Soundincludes an IR T1 small-area infrared transmitter, a TPF 055 power supply, a WCA 106 6′ micro-USB cable, a WIR RX22-4N infrared receiver, a STD 008 flat-panel TV mounting bracket, HED 021 folding headphones, and BAT 001-2 AA alkaline batteries. This IR SY1 kit can be used for a small-area assistive listening system or for private TV listening in small conference rooms, hospital rooms, assisted living facilities, medical treatment centers, and in jury deliberation rooms. It provides a coverage area of up to 1300 square feet.

Williams Sound IR T1 Small Area Infrared Transmitter for Assistive Listening

TheWilliams Sound IR T1is a dual-channel, infrared base transmitter designed for assistive listening in small areas. It is compatible with the WIR RX22-4 and WIR RX18 receivers and is well-suited for private TV listening in conference rooms, hospital rooms, assisted-living facilities, medical treatment centers, jury deliberation rooms, and more.

Easy to set up, the IR T1 features an 1/8″ input jack that accepts any line level stereo audio. The operating frequencies (2.3/2.8 MHz) minimize high-efficiency lighting interference for a clear sound and provide a coverage area up to 1000 ft.

Three LEDs display power status and audio input strength. If a minimum acceptable audio level is not present on a channel, after twelve minutes that channel will automatically go into sleep/power-save mode to decrease power consumption by 80%.

The IR T1 can be mounted on any camera tripod stand with a 1/4″-20 threaded connector. It ships with a power supply and USB power cable, an 1/8″ stereo audio cable, and an adapter cable for use with a TV equipped with an RCA audio output.

Specifications

Compatible Receivers WIR RX22-4
WIR RX18
Modulation Wideband FM
50 kHz deviation maximum
50 s pre-emphasis
Audio Carrier Frequencies Channel 1: 2.3 MHz
Channel 2: 2.8 MHz
Default at Power On: Carriers off
Carriers are automatically enabled upon presence of audio
Coverage Area 1000 ft / 93 m
Audio Inputs 1/8″ / 3.5 mm stereo line level input jack
Ch 1 connected to tip, Ch 2 connected to ring, GND connected to sleeve
Audio Indicators 1 x yellow LED per channel
Lights up and stays on steady with minimum audio level
Signal-to-Noise Ratio 70 dB, at onset of limiting
Frequency Response 100 Hz to 12 kHz
Power Supply TFP 050 (included)
Input: 100-240 VAC, 50/60 Hz
Output: 5 VDC, 0.2 A (USB Type-A)
Universal supply with international adapters
Other USB power supply (must be at least 5 VDC, 0.2 A)
Power Cable USB Type-A to micro-USB
DC Power Input Micro-USB connector, 5 VDC, 0.2 A
Power Indicators Green LED
Power Save Mode Shuts off carrier when no audio is present for 12 minutes
Color Black
Mounting 1/4″-20 threaded hole
Operating Requirements 32 to 122F / 0 to 50C
Approvals and Compliance CE, RCM, FCC, Industry Canada, PSE, CUL, WEEE, RoHS, CB Scheme
Dimensions 5.65 x 3.65 x 1.15″ / 14.4 x 9.3 x 2.9 cm
Weight 8.3 oz / 235 g


Williams Sound TFP 055 Power Supply for IR T1 Transmitter

TheTFP 055fromWilliams Soundis a power supply for the IR T1 transmitter less the power cord. It features a 100-240 VAC input with 50 to 60 Hz and 0.6 amperes. It can be used when paired with a WLC 004 USA line cord (sold separately). The output is 24 VDC, 1.04 amps, 25 watts maximum, and it is built with a barrel-style plug, center positive.

Specifications

Input 100 to 240 VAC, 50 to 60 Hz, 0.6 A
Output 24 VDC, 1.04 Amp, 25 W Maximum Barrel-Style Plug, Center Positive
Approvals UL, CE, RoHS, Energy Star 6
Recommended Line Cord Not Included, Sold Separately
WLC 004 USA
WLC 005 Europe
WLC 006 United Kingdom
WLC 007 Australia
Dimensions Not Specified by Manufacturer
Weight 0.4 lb / 0.2 kg


Williams Sound WCA 124 – 3.5mm Female TRS to Two RCA Male Cable Adapter for IR T1 (10.25″)

TheWCA 124fromWilliams Soundis a 3.5mm female TRS to RCA male Stereo Cable that can be used for TV or any other audio source with RCA stereo outputs. The cable converts the RCA outputs to a 3.5mm jack that can then be used with a 3.5mm stereo male to male cable (sold separately).

Specifications

Cable Length 10.25″ / 26.0 cm
Weight 0.8 oz / 23 g

Williams Sound WIR RX22-4N Infrared 4 Channel Bodypack Listening Receiver (2.3 – 3.8MHz)

TheWilliams Sound WIR RX22-4N Bodypackis an infrared bodypack listening receiver for use with compatible Williams Sound transmitters. The bodypack features 4-channels and operates on the 2.3, 2.8, 3.3, 3.8MHz bandwidth. The WIR RX22-4 can be used with mono or stereo headphones and earphones, or a neck-loop. Dual infrared detectors provide maximum sensitivity and operating range.

Specifications

Carrier Frequency 2.3, 3.3, 2.8, 3.8 MHz
Signal-to-Noise Ratio 60dB Min
Squelch @ 40dB S/N Ratio
Frequency Response 25Hz to 16kHz
THD & Noise Less than 1%
Connector 1/8″ (3.5mm) Connector
Controls On/Off/Volume, Channel Selector Knobs
Batteries x2 AA Alkaline or NiMH
60 Hours w/Alkaline, 30 Hours w/Rechargeable
Dimensions 4.1 x 2.5 x 1.2″ (104 x 72.4 x 30.4mm)


Williams Sound STD 008 TV Top Shelf for IR T1 Transmitter (Flat Black)

The flat blackSTD 008fromWilliams Soundis a TV top shelf for the IR T1 transmitter (sold separately). It features an all-steel adjustable arm with a swivel lock. The front padded lip rests on the top portion of the TV (sold separately) and the adjustable arm with the swivel lock supports the rear of the shelf against the back of the TV.

Specifications

Material of Construction Painted Steel
Shelf Support Front Padded Lip Rest on TV. Adjustable Arm with Swivel Lock Supports Rear of Shelf.
Dimensions 6 x 4.8″ / 15.2 x 12.2 cm
Weight 0.6 lb / 0.3 kg


Williams Sound HED 021 Folding Mono Headphones

Turn up the volume with the adult-sizedHED 021 Folding Mono HeadphonesfromWilliams Sound. These headphones are designed to offer crisp sound in a lightweight and comfortable design. Foam earpads keep you listening in comfort for hours. The single-sided cord helps to minimize snags and tangles, and the standard 3.5mm mono plug is compatible with Williams Sound receivers and Pocketalkers.

Specifications

Driver Size 1.2″ / 30mm
Maximum Power Handling 100 mW
Foldable Yes
Audio Connector to Source 1/8″ / 3.5 mm


Williams Sound AA Alkaline Battery (2-Pack)

ThisWilliams Sound AA Alkaline Battery2-pack is compatible with several FM listening systems, receivers, transmitters, earphones, headphones, and more.

Reviews

There are no reviews yet.

Be the first to review “Williams AV IR SY1 Small Area Infrared System 1 Kit”

Your email address will not be published. Required fields are marked *

Company Info

Copyright © 2022-2026.All Rights Reserved.