Description
The DHR10 is a 2-way bi-amp powered loudspeaker, equipped with a 10-inch woofer and a 1.4-inch HF driver, and perfect for use in fixed installations. Combining a 700W amplifier module and high-performance DSP with the same high-grade plywood construction found on Yamahas high-end DZR Series, the DHR10 offers best-in-class sound quality and durability.
- Featuring a plywood cabinet that delivers a clear sound with minimal vibration
- Plywood enclosure with a polyurea coating for a robust, scratch resistant surface
- Compact appearance thanks to a 10-inch LF driver that provides excellent low frequency response
- Can be installed in a horizontal or vertical configuration with a rotatable HF horn offering the flexibility needed for installation in a wide range of environments
- Optional UB-DXRDHR10 U-bracket allows both for vertical or horizontal use
- A pole socket for use on a stand
- Rigging points for use with eye bolts
- Proprietary FIR-X tuning, provides FIR filtering and corrective EQ, minimizing phase distortion
SPECIFICATIONS
- Speaker type 2-way, Bi-amped Powered Speaker, Bass-reflex
- Frequency range (-10dB) 52 Hz – 20 kHz
- Coverage area H90 x V60 (Rotatable)
- Crossover 1.9 kHz: FIR-X tuning (linear phase FIR filter)
- Maximum Output Level (Measured peak, IEC noise@1m) 128 dB SPL
- Components
- LF Diameter: 10″ cone, Voice Coil: 2″, Magnet: Ferrite
- HF Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite
- Amplifier class Class-D
- Power rating
- Dynamic 700 W (LF: 500 W, HF: 200 W) *
- Continuous 325 W (LF: 260 W, HF: 65 W)
- Cooling Fan cooling, 4 speeds
- Power consumption 60 W (1/8power), 18 W (Idle)
- Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
- A/D D/A Converters 24 bit 48 kHz Sampling
- Processors
- HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.
- D-CONTOUR: FOH/MAIN, MONITOR, OFF
- I/O connectors
- INPUT1: Combo x1
- INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced)
- OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Cabinet material Plywood
- Finish Durable Polyurea Painting, Black
- Handle Top x1
- Pole socket 35 mm x1 (Bottom)
- Rigging Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts)
- Floor Monitor Angle –
- Dimensions
- W 305 mm (12.0″)
- H 494 mm (19.5″) (with rubber feet)
- D 300 mm (11.8″)
- Net weight 15.0 kg (33.1 lbs)
- Options UB-DXRDHR10
* Total peak power of individual outputs (AC 120V, 25 ). This value was measured at minimum load impedance, with protection released.
Reviews
There are no reviews yet.